Applied Materials: Oilfield mud applicable equipment: plate and frame filter press Introduction of the scheme: After the analysis of the samples by the Bebon laboratory, it is found that the sewage treatment of the oilfield is mainly to remove the o...
Application material: Oilfield mud
Applicable equipment: plate and frame filter press
Introduction of the scheme: After the analysis of the samples by the Bebon laboratory, it is found that the sewage treatment of the oilfield is mainly to remove the oil, suspended solids and other unfavorable components that hinder water injection and easily cause corrosion and scaling of the water injection system, therefore, the researchers decided to lift the waste mud discharged during the drilling process to the debris cache device through the mud collecting box, and use the pump to lift it to the desilking coagulation tank, use dry powder adding machine to add lactating and coagulating drugs quantitatively. The coagulation liquid is pumped from the ceramic double-cylinder pump to the skid-mounted plate-frame filter press for solid-liquid separation. The separated mud cakes are transported out of the filter press unit by the belt conveyor, and the filtrate enters the subsequent purification treatment device. After working procedures one by one, the emission will finally meet the requirements.
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
1. Temperature of hydraulic oil: The temperature of hydraulic oil is generally maintained at 10 ~ 65°C. Excessively high oil temperature can vaporize the oil, generate water vapor, and cause corrosion to the accessories in the machine.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号