Home
News
Industry Information
Product Knowledge
Compared with other kinds of filter press, BBNEP vehicle-mounted filter press can be easily moved from one location to the next, so as to efficiently deal with distributed slurry. Under many conditions, water treatment or slurry dewatering takes pla...
Compared with other kinds of filter press, BBNEP vehicle-mounted filter press can be easily moved from one location to the next, so as to efficiently deal with distributed slurry.
Under many conditions, water treatment or slurry dewatering takes place in a factory or a fixed site. And the filter press is installed on a flat ground to deal with a large amount slurry every day. However, there are still many conditions where slurry is distributed, including oil, gas and fracking industries. Their working place is open and on remote sites, such as desert plains, ocean, mine and build. The filter press they need must have strong mobility, so as to moving from jobsite to jobsite.
In terms of above-mentioned points, the mobile filter press is well-suited for these short-term projects. Instead of having to install many filter presses in different places, vehicle-mounted filter press can meet all your needs.
In a word, if you want to deal with distributed slurry, vehicle-mounted filter press will be your first choice.
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
1. Temperature of hydraulic oil: The temperature of hydraulic oil is generally maintained at 10 ~ 65°C. Excessively high oil temperature can vaporize the oil, generate water vapor, and cause corrosion to the accessories in the machine.
Filtration Area：30-80㎡
Number of Filter Plates：23-62pieces
Filtration Area：15-40㎡
Number of Filter Plates：18-49pieces
Number of Filter Frame：19-50pieces
Filtration Area：10-20㎡
Number of Filter Plates：15-32pieces
Number of Filter Frame：16-33pieces
Filtration Area：15-40㎡
Number of Filter Plates：18-49pieces
豫公网安备 41019702003169号
