Regular examination and maintenance can keep the filter press in high working efficiency. When some problems occur, you should know reason and deal with it in time. The following Q&A are common conditions. Why do my filter press leak oil? O...
Regular examination and maintenance can keep the filter press in high working efficiency. When some problems occur, you should know reason and deal with it in time. The following Q&A are common conditions.
Oil leak needs immediate attention. One situation is that the cylinder is damaged. You can find experts to rebuilt or replace it. On the other hand, the reason may be a loose fitting, which you can tighten on your own.
This a problem that need your special attention. You can examine the filtration process to determine adjustments. Or you may need a trained filter press repair technician, who can provide valuable insight and solve this problem thoroughly. If you cannot solve this problem independently, you can contact us and we will designate professional to help you.
Firstly, you can try to reset the relief pressure. If it doesn’t work, you may need to replace relief valve.
Secondly, if pressure issue and oil leakage occur at the same time, you can deal with oil leakage first according to the answer of the first question.
The answer is yes. Preventative service can keep the filtering equipment in good condition and prolong its service life. If you have any difficulties, our certified filtration equipment experts can provide you help.
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
1. Temperature of hydraulic oil: The temperature of hydraulic oil is generally maintained at 10 ~ 65°C. Excessively high oil temperature can vaporize the oil, generate water vapor, and cause corrosion to the accessories in the machine.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号