In order to improve working efficiency, you may need to know about working principle of filter press. It is also helpful for you to choose suitable equipment....
BBNEP filter press is mainly used for dealing with a variety of liquids. It can be used to treat different liquids in different field. Its main functions are as below:
Working principle of BBNEP filter presses
At first, all filter plates close together and form closed filter chambers. Liquid will be send to chambers by pump. At this point, the filtration pressure is minimal and suspension flow rate is maximum. When liquid pass through filter cloth, solid materials will be leaved in filter chambers and gradually form filter cakes. At the same time, the flow rate decreases and the filtration pressure increases. When the chambers are filled with solid materials, the whole machine will keep maximum filtration pressure. The flow rate continues to decrease. The filtrate is discharged along the channel system. When filtrate no longer discharge, a filtration process finishes. Finally, you can unload filter cakes by pull filter plates in turn. If you adopt membrane filter press with automatic plate shifter, you can get filter cakes with lower moisture.
BBNEP filter press is widely used to deal with waste water in mining, printing, dyeing and papermaking, brewery and fermentation and other fields.
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
1. Temperature of hydraulic oil: The temperature of hydraulic oil is generally maintained at 10 ~ 65°C. Excessively high oil temperature can vaporize the oil, generate water vapor, and cause corrosion to the accessories in the machine.
Filter area:
Number of filters:
Filter area:
Number of filters:
豫公网安备 41019702003169号