Sludge treatment is not a new topic. Judging from the current environmental protection situation, with the expansion of production scale, the standard of sludge treatment will only get higher and higher in the next few years. In today's market, there...
Sludge treatment is not a new topic. Judging from the current environmental protection situation, with the expansion of production scale, the standard of sludge treatment will only get higher and higher in the next few years. In today's market, there are many sludge treatment equipment, and users can choose more directions, but too many choices will also make users fall into difficult choices. Today, I mainly recommend plate filter presses to everyone Machine, I hope to help you when choosing equipment.
What is a plate and frame filter filter press?
To put it simply, there are a lot of plate frames on the frame, relying on them to form a closed filter room, the sludge is filtered in this room, and finally achieve the purpose of sludge treatment. At present, the common plate and frame filter presses mainly include plate and frame filter presses, plate and frame filters, chamber filter presses, membrane filter presses and other equipment. They are the same in general structure, but only in the filter plate. Different processes have achieved different effects.
Advantages of plate and frame filter press
This type of equipment uses ultra-high pressure to squeeze out the moisture in the sludge during filtration. Compared with other sludge treatment equipment, its filtration principle is simpler; there is nothing very complicated in the structure, and maintenance is easy. It is very convenient; using this equipment at the same time can greatly reduce the use of flocculants, etc., and reduce operating costs; especially with the current technology, a fully automatic system can be installed on the plate and frame filter filter press to achieve unattended , Which greatly reduces labor costs.
Of course, the plate and frame filter press is only an option for sludge treatment. You can also choose other equipment, but it should be noted that you should be careful before purchasing equipment to ensure that it can run smoothly during the later use.
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
1. Temperature of hydraulic oil: The temperature of hydraulic oil is generally maintained at 10 ~ 65°C. Excessively high oil temperature can vaporize the oil, generate water vapor, and cause corrosion to the accessories in the machine.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号