< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1001777938899986&ev=PageView&noscript=1" />

Filter Press Trial Run: What Preparations You Need Before Commissioning | BBNEP

Time: Nov 14, 2026 Reading: 0
Checklist for filter press pre-commissioning: slurry & flocculant, filter plates & filter cloth, on-site staff, electrical and hydraulic system inspection. Ensure safe and smooth filter press trial run for sludge dewatering.

A smooth filter press trial run is the foundation of stable long-term sludge dewatering and solid-liquid separation operation. Skipping pre-run inspections often leads to slurry leakage, hydraulic failure, unexpected shutdowns and delayed project acceptance. To help you carry out commissioning safely and efficiently, BBNEP has sorted out the key preparations you must finish before starting your filter press trial run.
Installation site of the filter press

1. Material & Component Preparation

Enough slurry and matched flocculant should be prepared in advance for testing, so that we can observe the actual filtration effect, cake formation and filtrate clarity under real working conditions. Check all filter plates to confirm they are intact and aligned orderly. Inspect filter cloths for damage, folding or displacement, and make sure they are properly laid and sealed. Unqualified filter cloth or misplaced filter plates are the top causes of slurry leaking during trial operation.

2. On-site Personnel Arrangement

Reasonable manpower allocation guarantees timely response to emergencies. We recommend arranging 1–2 skilled operators responsible for equipment operation and parameter recording, together with a professional technical engineer on site. The technician can troubleshoot abnormal pressure, feed flow and cake issues immediately once they occur.

3. Electrical and Hydraulic System Full Inspection

Carry out a thorough inspection for the whole electrical control system: check wiring, power supply, control buttons and safety interlock devices to rule out electrical hazards. Test the hydraulic circuit carefully, verify the oil level, pipeline connections and pressure settings. Confirm there is no oil leakage and the plate closing / plate opening action works as designed.
Installation of the filter press

Final Reminder

Do not launch the filter press trial run until all above items have been fully inspected and confirmed qualified. Standard pre-commissioning work reduces equipment risk, shortens commissioning time and helps you get stable sludge dewatering performance faster.
The entire set of filter presses is configured and ready for shipment.

If you need on-site commissioning guidance or technical support for your filter press, contact BBNEP, your professional filter press manufacturer. We provide complete commissioning service and after-sales support for wastewater treatment, tailings dewatering and solid-liquid separation projects.