First of all, many people think that the filter press provides a lot of pressure, which can make the liquid press over the hydraulic station through the filter cloth. But the fact is not true. The pressure provided by the filter press only increases ...
First of all, many people think thatFilter PressIt provides great pressure to make the liquid pass throughFilter clothPress over the hydraulic station. But the fact is not true. The pressure provided by the filter press only increases the pressure difference between the two sides of the filter cloth, making the filtrate have stronger kinetic energy, which accelerates the liquid channel. The speed of the filter cloth is actually the same as the pressure of the filter. Just like the increase of the water level of the power station, it forms a certain decline and the kinetic energy brought by falling.
Secondly, the number of screens of the filter cloth only affects the filtering effect. This is not the case. The filter cloth affects the size of intercepting solid, and the number of curtains of the filter cloth also affects the filtering speed of the filter press (the number of curtains is density ). The larger the number of filter cloth curtain is affected by other factors, and the slower the filtering speed is under the same conditions. Moreover, the filter cloth also needs to be cleaned frequently,Beibang environmental protectionCustomers are advised to clean it once in about half a month. I believe that many customers have no habit of cleaning the filter cloth, and they will replace it until the filter cloth can not continue to be used, but this will have a great impact on the filtering effect of the filter press and the service life of the filter press.
The last is the misunderstanding about the diaphragm filter plate of the diaphragm filter press. Many people think that it is impossible to design the drainage channel. In fact, the part of the diaphragm filter plate needs to be expanded in the middle and usually does not move. We just need to design the drainage channel to the edge. Like box filter press, each filter plate can be emptied to make the equipment passageway smoother.
Do you understand the above misunderstanding?
Many people are very concerned about the price when purchasing a chamber filter press, but in the market its price on the market is also uneven. What is the reason for this?
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号