Reasons and Solutions for the Weak Pulling Plate of the Filter Press Trolley

1. Increased Friction

When using a filter press, the weak pulling force of the trolley may be caused by increased friction. This problem is mostly caused by poor lubrication or dust and impurities on the wheels of the car. It is necessary to regularly clean and maintain the track and lubrication parts of the car, and use appropriate lubricating oil for lubrication to prevent an increase in friction caused by insufficient lubrication. Regularly inspecting the small wheel part, removing dust and foreign objects, and ensuring the normal operation of the wheel can effectively prevent and solve the problem of small car weakness caused by increased friction.

2. Insufficient Power

Insufficient power is one of the common reasons for the weak pulling of the filter press plate trolley. There are problems with the trolley's power source such as the engine or electric drive device, and insufficient power supply causes the trolley to be unable to pull the filter plate smoothly. Carefully inspect the engine or electric drive device to ensure its normal operation; Check the power supply system to ensure normal power transmission and sufficient battery power; Timely repair or replace damaged parts, regularly clean the power transmission chain, gears, and other parts to ensure smooth power transmission and improve power transmission efficiency.

3. Filter Media Issues

Blockage or damage to the filter medium can cause an increase in resistance when the car pulls the plate, resulting in a weak force when the car pulls the plate. Regular cleaning of the filter media is required to ensure unobstructed channels. If the filter medium is damaged or broken, a new filter medium should be replaced immediately to ensure normal filtration effect. This not only improves the efficiency of the equipment, but also extends its lifespan.

4. Car Malfunction Itself

The malfunction of the car itself may cause the pulling plate to be weak, mainly manifested as damage to the car structure or components, such as aging bearings and transmission chains. Carefully inspect the structure of the car, identify potential problem areas, and ensure that all components are securely connected and not loose. Repair or replace damaged parts found, especially bearings, transmission chains, and other components that are prone to wear, and replace them with new parts in a timely manner. Regularly clean the car to ensure that all components are in a clean state, avoiding dust, debris, and other factors that may affect the normal operation of the car.

5. Hydraulic System Malfunction

One of the reasons for the weak pulling plate of the filter press trolley is the insufficient power supply caused by hydraulic system failure. Malfunctions may include insufficient hydraulic system pressure, oil contamination, or oil pump failure. Carefully inspect the hydraulic system to ensure that the hydraulic oil is of good quality and free from impurities; Check the operating status of the oil pump to ensure its normal operation. If there is any abnormality, the oil pump needs to be repaired or replaced; If the hydraulic system pressure is insufficient, it is necessary to adjust the working pressure to the normal range to ensure that the car has sufficient power support.